Put plain paper on one side and money will appear out the other side.
Hello, creative world greetings. this is my second entry for this month's contest magic. Here I present my magic money printer.
that everybody would like to have. It is easy to print money and easy to make at home, writing yhe tutorial is quite difficult but I am trying my best to explain how to do it.
Material required:
1 base wooden block 17cm x 5cm
2 thin wooden plates 13cm x 5cm
2 grill bamboo skewers 25 cm
2 paper pipe 17cm
normal glue
glue gun
push pins
plain A4 white sheet.to make note shape.
brown paper for wrapping wooden blocks.
scale
scissors
pencil
black plastic from a garbage bag.
2 old magazine pages.
normal type
Wrap the brown paper around the wooden blocks using white glue.
roll old magazine pages into 2 tubes and cut them to 17cm
length size.
the wooden blocks and pipes are ready.
Insert the bamboo pins in the 2 paper tubes and glue both ends using a glue gun.
on the thin wooden plate mark the point for the hole according to the rolling pins should work as a roller.
I figured out that the first point from the end of the wood is 2.5 cm and the second point is 4cm so the paper rollers will be 1.5 cm apart. mark those points on both wooden plates.
Now make a hole according to marked points using a pin.
Both thin wooden plates have holes as marked.
cut both skewers such that they are longer than the paper roller
5 cm on one end and 3.5 cm on the other.
Place the pins in the appropriate holes. on each side one pin must stick out 5 cm and the other pin 3.5 cm. the ends will not line up - one longer and one shorter.
using the glue gun fix both thin wooden plates to the base wooden block to form a frame.
cut the piece of black plastic around 50 cm in length and 17 cm in width.
tape one end of the plastic to the upper pin and turn the pin to roll the plastic around it.
when almost all the plastic is rolled on the top roller with just a little hangin down the end remains tape that end to the lower roller.
The magic money printer is ready.
turn the top pin while inserting a real currency bill between the rollers. it will wrap around the pin inside the platic so it will be hidden.
cut the plain paper to the same size as the real currency and write the value you will print on it. insert that paper from the opposite side that you inserted the real money and turn the lower pin. As the paper goes in the hidden money will come out.
Now you are printing your own money!!!
Thank you for stopping by.
