🌸Español🌸
Muy linda noche para todos 💕 un saludo muy especial para todos los artistas de #Diy es un gusto poder compartir con ustedes la confección de este lindo vestido que realice el día de hoy pues se trata de un vestido con abertura lateral y largo haciendo este muy elegante y el cual te enseñaré hacer a partir de ahora.
Estos fueron los materiales que use
• Máquina de coser
• Tijera
• Hilo de coser
• Retazos de tela
• Prenda de medida
• Cremallera
✨️Pasos✨️
•✨️Cómo primer paso voy a iniciar cortando la parte trasera usando las orillas de la tela es decir que mi parte trasera estará constituida por dos piezas, una pieza delantera y cuatro respectivos forros, dos copas y dos tiros.
•✨️Comienzo cosiendo la pinza frontal de 1,5 cm en ambos lados para luego coser la orilla de mi abertura lateral cada orilla de cada lado la doblare y voy a coser con costura de zigzag para luego doblar hacia adentro aproximadamente 1 cm y coser con costura recta.
•✨️Luego voy a coser los tiros con costura recta para luego voltearlas con un palillo y pasarle otra costura recta por encima y continúo armando cada copa con su forro y de una vez introduzco el tiro y coseré con costura recta y la orilla del forro con una costura de zigzag luego voy a unir mis copas mediante una costura recta en el centro.
•✨️Continúo uniendo las copas con la parte frontal del vestido usando la costura recta y zigzag para asegurar luego haré pequeños pliegues en el centro de la copa y cosere con costura recta y luego voy a trabajar en la parte trasera uniendolas con una costura recta y zigzag en ambas orillas dejando un espacio para la cremallera luego haré una pinza en cada extremo para darle caída al vestido esto lo haré con la costura recta y voy a coser los forros laterales traseros.
•✨️Luego pasaré una costura recta en la orilla del forro interna y luego procederé a coser la cremallera usando la costura recta una vez hecho esto voy a cerrar la prenda en cada extremo con una costura recta y zigzag para asegurar. Continuo cosiendo los tiros en la parte trasera con una costura recta y para finalizar voy a doblar el ruedo para coserlo con una costura recta y culminar así este lindo diseño.
🌸Resultados🌸
Es un vestido muy elegante y cómodo además de hacerme lucir muy femenina y linda 💕 me encantó su diseño de pierna descubierta espero que a ustedes también les haya gustado 😘 muchas gracias por haber tomado un minuto para leer mi post espero les sirva de ayuda para futuros proyectos. Hasta pronto queridos amigos de Hive 💕🤗.
🌸English🌸
A very nice night for everyone 💕 a very special greeting to all the #Diy artists, it is a pleasure to be able to share with you the preparation of this beautiful dress that I made today because it is a dress with a side opening and a long length, making this very elegant and which I will teach you to do from now on.
These were the materials I used
• Sewing machine
• Scissors
• Sewing thread
• Fabric
• Measure garment
• Zipper
✨️Steps✨️
•✨️As a first step I am going to start cutting the back part using the edges of the fabric, that is to say that my back part will be made up of two pieces, a front piece and four respective linings, two cups and two shots.
•✨️I start by sewing the 1.5 cm front dart on both sides and then sew the edge of my side opening, I will fold each edge on each side and I will sew with a zigzag seam and then fold inward approximately 1 cm and sew with straight seam.
•✨️Then I am going to sew the shots with a straight seam and then turn them over with a toothpick and pass another straight seam over them and I continue to assemble each glass with its lining and at once I introduce the shot and I will sew with a straight seam and the edge of the lining with a zigzag seam then I am going to join my cups by means of a straight seam in the center.
•✨️I continue to join the cups to the front of the dress using the straight and zigzag seam to secure then I will make small pleats in the center of the cup and sew with a straight seam and then I will work on the back joining them with a straight seam and zigzag on both edges leaving a space for the zipper then I will make a dart at each end to give the dress drape this I will do with a straight seam and I will sew the back side linings.
•✨️Then I will pass a straight seam on the edge of the inner lining and then I will proceed to sew the zipper using the straight seam. Once this is done, I will close the garment at each end with a straight and zigzag seam to secure. I continue sewing the inseams on the back with a straight seam and to finish I'm going to fold the hem to sew it with a straight seam and finish off this beautiful design.
🌸Results🌸
It is a very elegant and comfortable dress besides making me look very feminine and cute 💕 I loved its bare leg design I hope you liked it too 😘 thank you very much for taking a minute to read my post I hope it helps you in the future Projects. See you soon dear friends of Hive 💕🤗.
💁♀️Todas las fotografías son de mi autoría capturadas con mi Samsung Galaxy A12 y editadas en GridArt.
El texto y resumen es totalmente de mi autoría.
Texto traducido en el traductor Google.💁♀️
💁♀️All the photographs are my own, captured with my Samsung Galaxy A12 and edited in GridArt.
The text and summary is entirely my own.
Translated text in Google translator.💁♀️