Tutorial to make a snail tassel bracelet with tassel||Tutorial para hacer una Pulsera de caracol con borla. Por @hetyg

in #hive-1305602 years ago

image.png

English

Friends of the beehive!

I am here once again to share with you a new costume jewelry project, as I shared with you in other occasions it is one of my great passions and these days I started a new collection in natural tones and with seeds, mother-of-pearl among other elements that are found in the environment and that well worked make part of beautiful original handmade accessories.
Since this is one of the particularities of the pieces of jewelry that each one has a portion of the artisan who puts his heart in each of the elements worked, in this sense, I will show you how to make a simple, ethnic and natural bracelet.

Materials

  • 60 cm of natural jute cord.
  • 1 snail for costume jewelry
  • 1 ring of 18 gauge wire
  • 10 cm of caramel colored snakeskin.
  • Scissors
  • Flat tip tweezers.
  • Crochet thread
  • Tinder

Procedure

Step 1

Take the crochet thread and make 30 turns on the base of the tinder, at the end of the 30 turns cut the thread and remove the small skein of the tinder, with a small piece of thread tie in the center of the skein, then with another piece of thread tie about a cm below to form the tassel, once it is tied, cut the bottom to make the tassel, cut to match all the edges of the tassel.

image.png

Step 2

Now proceed to make the bracelet, for this I will cut the jute in two sections of 30 cm each.

Step 3

Insert a section of jute through a hole in the snail and tie a round knot.

image.png

Step 4

Proceed in the same way on the other side of the snail.

image.png

Step 5

Next, attach a wire ring to the tassel, using the flat-nosed pliers.

image.png

Step 6

Place the tassel on the bracelet.
Place the tassel on the bracelet near the snail, making sure to close the ring tightly with the tweezers.

image.png

Step 7

With the 10 cm of snakeskin cord, make a flat macrame knot to make the adjustable bracelet, it is worth noting that these measurements are for a bracelet for a lady with a small or thin wrist.

image.png

Once finished this is how the snail bracelet looks like.

I hope you liked it.

image.png

Thanks for reading me!
Photos by @hetyg
Translated with www.DeepL.com/Translator (free version)


Español

Amigos de la colmena!
Estoy una vez por aquí, para compartirles un nuevo proyecto de bisutería, como les compartido en otras ocasiones es una de mis grandes pasiones y por estos días inicie una nueva colección en tonos naturales y con semillas, nácar entre otros elementos que se consiguen en el ambiente y que bien trabajados hacen parte de hermosos accesorios originales hechos a mano.
Ya que esta es una de las particularidades de las piezas de bisutería que cada una tiene una porción del artesano que pone su corazón en cada uno de los elementos trabajados, en tal sentido, les mostrare como hacer una pulsera sencilla, étnica y natural.

Materiales

  • 60 cm de cordón de yute natural
  • 1 caracol para bisutería
  • 1 argolla de alambre cal 18
  • 10 cm de piel de serpiente color caramelo.
  • Tijera
  • Pinza de punta plano.
  • Hilo de crochet
  • Yesquero

Procedimiento

Paso 1

Tomar el hilo de crochet y dar 30 vueltas sobre la base del yesquero, al terminar la 30 vueltas cortar el hilo y sacar la pequeña madeja del yesquero, con un trozo de hilo pequeño atar en el centro de la madeja, posteriormente con otro trozo de hilo amarrar un cm aproximadamente mas abajo para formar la borla, una vez que esta atado, cortar la parte inferior para hacer la borla, cortar para emparejar todos los borde de la borla.

image.png

Paso 2

Ahora procedo hacer la pulsera, para ello cortare el yute en dos secciones de 30 cm cada una.

Paso 3

Introducir una sección de yute por un orificio del caracol y realizar un nudo redondo

image.png

Paso 4

Proceder de igual manera del otro lado del caracol.

image.png

Paso 5

Lo siguiente será colocar una argolla de alambre a la borla, con ayuda de las pinzas de punta plano.

image.png

Paso 6

Colocar la borla en la pulsera cerca del caracol, asegurarse de cerrar bien la argolla con ayuda de las pinzas.

image.png

Paso 7

Con los 10 cm de cordón piel de serpiente, hacer un nudo plano de macrame para hacer la pulsera ajustable, vale la pena destacar que estas medidas es para una pulsera de dama con una muñeca pequeña o delgada.

image.png

Una vez terminada así es como luce la pulsera de caracol.

image.png

Espero les haya gustado.

image.png

Gracias por leerme!
Fotos de @hetyg

@Hetyg.png

Sort:  

Está hermoso amiga

Gracias amiga!
Saludos!

Pearls are so pretty.

Thank you

wow yes

Me gustó mucho tu trabajo. Me encanta la combinación de colores que hacen resaltar el Caracol.... gracias por compartir. Saludos!!!

🎇🎆🎇🎆🐞🐝🌍🌌🌠☄️🌙✨💫🌟⭐☀️☘️🍃🌿🌱🌾🍄🍁🍂🌼🌻🏵️💮🌸🌲🌳🦋🐝🐞💐🌹🥀🌺🌷🌸💮🏵️🌻🎇🎆🎇🎆

Que bueno que te gusto amiga!
Saludos y gracias por la visita!

Amiga que bello! Me gustó mucho, te cuento que en general no soy fanática de las pulseras, pero está la usaría sin duda! Saludos 🤩✨

Hola amiga! que bueno que te gusto!
Saludos!

¡Felicitaciones!


Has sido votado por @entropia

Estás participando para optar a la mención especial que se efectuará el domingo 22 de mayo del 2022 a las 8:00 pm (hora de Venezuela), gracias a la cual el autor del artículo seleccionado recibirá la cantidad de 1 HIVE transferida a su cuenta.

¡También has recibido 1 ENTROKEN! El token del PROYECTO ENTROPÍA impulsado por la plataforma Steem-Engine.


1. Invierte en el PROYECTO ENTROPÍA y recibe ganancias semanalmente. Entra aquí para más información.

2. Contáctanos en Discord: https://discord.gg/hkCjFeb

3. Suscríbete a nuestra COMUNIDAD y apoya al trail de @Entropia y así podrás ganar recompensas de curación de forma automática. Entra aquí para más información sobre nuestro trail.

4. Visita nuestro canal de Youtube.

Atentamente

El equipo de curación del PROYECTO ENTROPÍA

Gracias por el apoyo!

Thank you for sharing this amazing post on HIVE!
  • Your content got selected by our fellow curator @rezoanulvibes & you just received a little thank you via an upvote from our non-profit curation initiative!

  • You will be featured in one of our recurring curation compilations and on our pinterest boards! Both are aiming to offer you a stage to widen your audience within and outside of the DIY scene of hive.

Join the official DIYHub community on HIVE and show us more of your amazing work and feel free to connect with us and other DIYers via our discord server: https://discord.gg/mY5uCfQ !

If you want to support our goal to motivate other DIY/art/music/homesteading/... creators just delegate to us and earn 100% of your curation rewards!

Stay creative & hive on!